Home > News > Content

PTFE Tube Good Sealing Performance

Yangzhong Tianyou Seals Co.,Ltd | Updated: Nov 01, 2017

PTFE Tube Good sealing performance

Because PTFE has strong corrosion resistance, good sealing properties, often made of PTFE gasket, the current industry, military, machinery, life, flanges and other aspects of the application of many; with polytetrafluoroethylene Corrosion resistance is very strong, insulation performance, anti-aging characteristics, so PTFE pipe in the petrochemical industry and other industries to do corrosive gas pipeline; polytetrafluoroethylene bar (1, diameter is 55 mm to 300 mm 4, diameter of 10 mm to 50 mm PTFE rods were selected from the suspension of PTFE resin extrusion processing; 3, 4 mm to 9 mm in diameter PTFE rods The use of dispersion polymerized polytetrafluoroethylene resin through the paste made of paste;) also has good chemical stability, low coefficient of friction, non-adhesion and other excellent features for corrosive media with a gasket seal and Lubricating materials and insulating parts.

Anticorrosive materials

Polytetrafluoroethylene material to overcome the common plastic, metal and other intolerance of the shortcomings of the oil, chemicals, textile industry has become the main anti-erosion materials. Such as for the manufacture of transporting corrosive gas transmission pipe, exhaust pipe, steam pipe and so on.

Oil-free material

Polytetrafluoroethylene is the lowest coefficient of friction in engineering plastics, so it is filled with mechanical equipment for oil-free parts of the best material. In the food industry, paper industry, textile industry, such as a plus lubricants will make products tainted areas, PTFE is a good solution to this problem

Advanced media materials for electronic equipment

 Polytetrafluoroethylene has been listed as the ideal insulation material for cable wires in recent years. The reason is that PTFE itself has its own low loss, abrasion resistance, aging resistance, dielectric constant, thermal stability and certain flexibility And so on, PTFE porous design can make the loss and distortion rate to a minimum, it is a good filler media materials, is widely used in computers, telecommunications, aviation, defense and many other challenging areas.

Anti-sticking material

Polytetrafluoroethylene is resistant to high and low temperature, does not adhere to any material, and its surface tension is the smallest, non-toxic, etc., mainly used for microwave and non-stick pan liner.