Home > News > Content

High Quality PTFE/ Teflon Gland Packing (MK-4000)

Yangzhong Tianyou Seals Co.,Ltd | Updated: Oct 05, 2016
Basic Info
  • Model NO.: TY-20

  • Material: PTFE

  • Size Range: 4mm-60mm

  • Package: Roll+Box+Carton

  • Origin: CHINA

  • Standard: Standard

  • Usage: Pump, Compressor, Valve

  • Trademark: Michael seals

  • Specification: ISO9001

  • HS Code: 3920991000

Product Description
Gland Packing

1. 100% Pure PTFE Braided Packing 

Pure PTFE packing is braided with Pure PTFE yarn, applicable far seal packing of valves, vessels and pumps of corrosive medium in chemical, medicine, food, petrochemical and power industry.


1. Fast and simple to install, with minimum maintenance requirements.
2.Pure Teflon Packing can be adjusted very finely and reduced to extremely low levels.

3. High chemical resistance, very low coefficients of friction.



100% Pure PTFE Packing with Silicone Oil is suitable for valves and pumps used in food processing, pharmaceuticals, paper mills, fiber plant, where high purity and corrosion resistance is required. 

2. PTFE Graphite with Aramid fiber (in Corners Reinforced) Braided Packing

It is a high-quality braided packing made of graphite PTFE inter Aramid fiber. lt can prevent gap from extrusions in the present of high pressure and temperature.

3. PTFE with Graphite Braided Packing       

Braided with PTFE Graphite Yarn structural material, having high strength, creep resistance, good self-lubrication and thermal conductivity, applicable for packing seal of valves and pumps,hot water, high temperature and pressure steam, heat transfer fluid, hydrogen gas, ammonia,organic solvents,hydrocarbons, cryogenic liquids etc.

4.PTFE with aramid fiber in corners reinforced braided packing.
Blended and braided with Pure PTFE yarn & Aramid fiber through special process, wrapped with aramid fiber at 4corners, very highly wearing resistant, applicable for dynamic seal under high linear speed and high medium pressure. 

5.Ramie Fiber Impregnated with PTFE Braided Packing
Made through braiding of ramie filament,impregnated with graphite and lubricated,shaped to size.It is highly wearing resistant, good lubrication and ideal subsitute for asbestos graphite packings,especially applicable of ship industry.

6.Acrylic Fiber Impregnated with PTFE Braided Packing

Made of polyacrylonitrile filament through reinforcing braiding and impregnated with PTFE, having high strength, wear-and impact-resistance, an ideal substitute for asbestos packings, and applicable for packing seal of pumps, valves and vessels at a high linear speed and pressure.
Model numberMK-4221
Linear speed (m/s)0~20
Temperature( °C)-100~280
PH range2~14